The Beginners Runner Guide To Negative Splits

Beginners Runner Guide To Negative Splits

Whether you’re training for your first 5K or for a new personal record, your pacing strategy can make the difference between failure or success

One simple yet very reliable strategy is the negative split. Performing them is one of the best ways to build your aerobic base and endurance, which is more critical at events like the half marathon and marathon.

Would you like to learn more about how to practice this strategy in your training? Then keep on reading.

In today’s article, I’m going to share with you the full guide to negative splits without any technical jargon or complicated non-sense.

In short, I’ll look at:

  • What are negative splits?
  • The benefits of negative splits
  • The downsides of negative splits
  • How to incorporate them
  • How to practice negative splits
  • How to follow a negative split on race day
  • And so much more.

Sounds great?

Let’s get started.

What Is Negative Split?

Keeping a steady pace during a race is tricky. Competition, terrain variability, elevation changes, and weather conditions can all impact your running speed.

That said, and most experts would agree, negative splits are an unfailing pacing strategy in virtually every racing scenario—or whenever trying to improve your running times.

In fact, by design, negative splits are an advanced tactic that can guarantee a fast finish time.

So what are negative splits? And why should you care?

First things first, let’s start with the basics.

A split in the running world refers to the time it takes to complete a certain distance.

Are you still confused? Then simply break down your run into two or three more equal-distance portions. A split refers to the time needed to complete one of those segments.

So what does make a split negative?

In essence, a negative split refers to running the back half of a run or race faster than you ran the first half. You run slower in the first part, then speed up in the second half.

This can mean 10 seconds faster or five minutes faster, but most runners would stick to an even pace through most of the race then gradually speed it up as they get close to that finish line.

For example, if you run a half marathon with 10K splits of 55:15 and 54:45 for 01:53:40 (including the additional sprint to the finish line), you have just run a negative split as the second portion of the race is faster than the first.

By doing this, you save a lot of power, endurance and feel like you have more energy during the race.

Additional Resource – Here’s how many miles should a beginner run

What Are Positive Splits?

As the name implies, a positive split is the opposite of a negative split. When you do a positive split, you actually run the second half of the run/race slower than the first half.

This strategy is helpful if you’re want to stay consistent while running, especially if you’re tackling a really hilly course with lots of elevation changes and/or terrain variability. But again, it may not work for everyone.

What Are Even Splits?

Again, this is simple. An even split involves keeping a consistent pace throughout the entire run/race. This means running the two halves of a race—or a run—in the same amount of time.

For example, if you want to run one mile on a standard track in 4:48, you’d have to run four 72-second laps, with each lap counting as a split to achieve this goal.

This is a common goal among beginner racers in virtually all distances.

Unfortunately, all it takes is a bit of distraction, fatigue, or a tiny problem, and your even splits are ruined. Unless you can keep that even pace throughout, this strategy may prove futile.

The Benefits of Negative Splits

As you can already tell, negative splits have a lot to offer.

Let’s discuss a few of the perks.

Warm Up Properly

Kicking up your runs at a slow pace allows for your muscles and joints to gradually warm up, which may help avoid injury and ensure optimal performance.

Find True Pace

One of the most common mistakes runners make is rushing out of the gate during a race.

For this reason, determining your true pace helps set a realistic time goal for your next run/race.

Figuring out your “true pace” is key, especially when running for an extended period. By doing a negative split, you’ll start your session at a conservative pace then speed it up in line with your current fitness level.

Ensure Good Speed

Negative splits, by definition, involve running the latter portion of a race faster than the first half—as long as you stick to a realistic pace.

That’s why if you plan them right, you’ll, consequently, conserve your energy and be able to run your fastest race.

It also reduces the risk of slowing down as the race drags on.

Additional resource – How many miles is a half marathon

The Downside

As in everything else in life, negative splits are not the answer to all of your running race prayers.

One downside is the fact that negative splits do not work on all race distances/courses.

For example,  a racecourse that kicks off downhill and finishes with a drastic elevation gain may require a positive split, in which you run at the end even effort.

How To Execute A Negative Split

While it’s easy to say, “run the second half faster than the first,” it’s actually much more challenging to put it into practice.

In fact, Practicing negative splits is tricky, especially in the midst of a race when your adrenaline is soaring and other runners begin to outpace you.

To get the hang of it, you’ll need to follow a proper training plan and practice negative splits as often as possible.

Practice makes perfect, after all. And it’s what you need to ensure that you get used to the experience of performing a negative split so you can easily follow the strategy on race day.

negative splits guide
Athlete running on an all-weather running track alone. Runner sprinting on a blue rubberized running track starting off using a starting block.

The Step By Step Guide

First, begin by figuring out your goal pace goal, for example, 10K race pace, or simply a pace you can keep up.

During the first few miles, focus on saving up your energy by running 20-30 seconds per mile slower than your goal pace. Don’t focus too much on speed.

During the first third, focus on saving energy by running 10 to 30 seconds per mile slower than your goal pace.

As you near the middle third of the race, kick it up a notch to a realistic pace that you can keep up for the remainder of the race.

Once you reach the final stretch of the race, use any remaining energy and run as fast as possible. Shoot for 20 to 30 seconds faster than your goal pace.

For instance, if you’d like to negative split a half-marathon, and you feel confident you can finish it in precisely two hours, aim to run the first half in roughly 61-63 minutes. Then, on the second half, aim to finish it within 57-59 minutes.

Now let’s look at some ways by which you can start adding negative splits into your training.

Steady Runs

Steady runs, anything from two to six miles at a steady effort, should be negative splits all the time, even if you don’t have any specific racing goals.

Here’s how.

Break your session into three thirds.

For example, if you’re running for 45 minutes,(1) jog the first 10 minutes at an easy pace, (2) run the middle 20 minutes at a medium-fast pace, then (3) the last 15 minutes as fast as possible for the remaining duration.

This will definitely guarantee a negative split run which helps your body practice what it’s like to finish faster than the start.

Progression Run

Another way to practice negative splits is to do a progression run, which is gradually increasing your pace throughout the session.

Here’s how.

Start slower than you have to, then increase the pace in increments (every mile or so) until you’re running as fast as you can in the final mile. This is an ideal strategy to help teach your body and mind how to speed up on tired legs, which inherently translates to a faster finish time.

Here’s a simple six-mile workout.

  • One mile at an easy pace
  • One mile at marathon pace
  • One mile at half marathon pace
  • One mile at 10K pace
  • One mile at 5K pace
  • Five minutes jog/walk as cool down.

Interval Training

The best way to practice negative splits by doing interval workouts.

For example, if you’re training for a 5K, perform 10 X 400m at your desired speed, along with a one-minute break after each interval. Your goal is to get run each interval a little bit faster than the previous one until you’re running the last one as fast as you can.

Here’s is a sample session:

  • Start with a 10-15 dynamic warm-up. Here’s how.
  • Perform 8 to 10 400-meter with 60 to 90 seconds of rest between each interval.
  • Finish with a 10-minute cooldown.

Here’s another variation

Example one–  10 X 400-meter reps with a one-minute rest break.

  • Run intervals 1 to 4 five seconds slower than your goal pace.
  • Run intervals 5 to 8 at your goal pace
  • Run the last two intervals 5-10 second faster than you goal pace.

Example Two – 8 X 800-meter with 90 seconds break.

  • Run intervals 1 and 2 five seconds slower than your goal pace.
  • Run intervals 3 to 5 at your goal pace
  • Run the last three intervals at 5-10 seconds faster than your goal pace.

The Long Run Negative Split

Long runs are another suitable workout for negative splits, especially when training for a long-distance race, such as a marathon.

And it’s really simple.

Start slow and steady, then settle into a comfortable pace. Complete the first 60-70 percent of the session at an easy, conversational pace. You should be able to recite the pledge of allegiance without panting for air.

Then, gradually pick up the pace for the last quarter until you’re running at your 10K pace or a little bit faster.

For example, if you’re running for two hours, run the first 80 to 90 minutes at the easy pace, then pick up the pace over the last 40 to 30 minutes of the run.

Beginners Runner Guide To Negative Splits – The Conclusion

Most running coaches and experts emphasize the importance of protecting a good pacing strategy for the optimal racing experience.

As you can tell by now, I’m a big fan of the negative splits, and I believe it’s the ideal way to pace on race day.

You just need to practice it more during your training so you can set realistic expectations and learn how your body reacts to the pace.

The rest is just details, really.

Please feel free to leave your comments and questions in the section below.

In the meantime, thank you for dropping by.

Keep training strong.

David D.

Cross Country Running Tips For For Beginners

cross country running

Cross country running is no easy jog in the park—you need to ready for anything in your path.

Rocks, roots, steep inclines, streams, and adverse weather can all be challenging but fun “complications.”

Training properly for a cross country event will give you the endurance, agility, and strength needed to reach your full performance potential.

In today’s article, I’ll spill the beans on cross country running and why so many enjoy it.

I’m also sharing a few tips on how to get started with cross country running and how to make the most out of it.

Sounds exciting?

Let’s lace up and dig in.

What is Cross Country Running?

Also known as XC running, cross country running is a form of racing that takes place in open-air, natural environments and seldom run along paths or roads.

From obstacle to jump over, steep hills, and slippery muddy descent, cross country running offers a broad range of challenges that will literally keep every runner on their feet.

What’s more?

Cross-country events take place in all sorts of weather conditions, which can drastically impact performance.

These include rain, snow, wind, ice, hail as well as heatwaves. In fact, cross-country events are seldom canceled because of adverse and bad weather.

XC running races are held during the fall or winter months, and many runners, recreational and elite alike, use the sport as means for improving endurance and staying fit throughout the cold months.

The Distance Of Xc Running Events

Just like other races, XC running varies in distance and will typically depend on the age group, but typically the distances from 4km to 12km.

Some of the most popular XC running events include:

The annual World Cross Country Championships

  • NCAA Cross Country
  • Cross Country Championships
  • The English National Cross-Country Championships

The History

Cross country events trace their history to the 19th century in the form of an English game called “hard and bounds” or “the paper chase.”

English schools began holding competitions in cross country running as far back as 1837, then on the 7th December 1867, the national championship was held for the first time on Wimbledon Common in south-west London, then the first international one took place in 1903 at Hamilton Park Racecourse in Scotland.

Not long thereafter, cross country running made its way to the Olympic Games in 1912, becoming a popular event for the games.

But the sports didn’t fare well in the Olympics.

A Disaster of Olympic Proportions

At the 1924 Paris Olympics, a devastating heatwave during the race resulted in only 15 of the 38 participants reaching the finish line.

Eight of those ended up needing serious medical help.

Jose Andia and Edvin Wide were both reported dead (but the reports of their demise were actually exaggerated)  while the medics spent hours trying to locate the participants who fainted along the course.

In fact, one of the competitors started to run tight circles after reaching the stadium until he knocked himself unconscious while another collapsed a few meters from the finish line.

Although the fatality reports were unfounded, the public was so horrified at the conditions of the race that Olympic officials ruled to ban cross country running races from future games. Things may change in the upcoming Olympic event but fingers “crossed.”

For more on the history of cross country running, check the following articles:

Additional Resource – Here’s how many miles should a beginner run

When Is Cross Country Season?

Cross country running races normally take place during the autumn and winter season, usually held from early October up until February and early March.

Not Easy

X-C running is no joke. In fact, it’s one of the most challenging events out there.

The sport isn’t just about the competition between you and other runners.  You also need to overcome mother nature as you make your way through slippery roads, steep hills, technical terrains, and everything in between.

All of these challenges conspire to constantly disrupt your rhythm and throw you off your footing much more than your typical race on a flat, predictable surface.

That’s why you’ll need specific cross-training training to make it through over the variety of surfaces unscathed.

Beginner Cross Country Running Tips

Now that you know a thing or two about XC running, the question is, how do you actually train for one?

Let’s find out.

How Train For Cross Country Running

As previously explained, typical XC running events range from 4 to 12 kilometers.

All these distances are primarily aerobic, meaning if you go off the gate too fast, you’ll run yourself into the ground in the latter portions of the race. Few things are as bad as being passed by runner after the next over the last part of a cross country event.

That’s why to run your cross country race, make sure you’ve enough endurance to run well over a distance of 6.2 miles. This is a key factor in cross-country success.

 cross country running

Crush Hills

One of the most challenging aspects of cross country running is how much up and down is involved in the race.

Although the typical XC running events aren’t long, the constant up and down is involved in the race can be tricky.

That’s why simulating these conditions before the race will better prepare your body and mind for the event.

How? Quite simple –train on hills. Doing hill work—either hill sprints or uphill endurance running—is one of the best ways to get your body used to the changing pace of an XC running event.

Even if you hate hills, incline training is key to building country running specific speed, strength, and endurance.

Here’s a sample workout to try out.

Locate a hill of no more than 400 to 600 meters in length, preferably on a softer surface off the asphalt.

Next, following a dynamic warm-up on a flat surface, run the uphill portion at a sustainable yet challenging effort, focusing on being fast and efficient, Then jog down for recovery.

Repeat for a minimum of 6 to 8 reps, depending on your fitness level and weekly mileage, then finish with a 10-minute slow jog.

For more on-hill training for runners, check my guide here.

You can also work on improving your form by doing agility ladder drills.

Your Running Shoes

To properly train for and run a cross-country race, make sure you have proper footwear.

Picking the proper pair is key to reduce your injury risk while subsequently improving your performance.

Runners who compete in X-C races usually used spiked shoes. These shoes are specifically designed to offer traction and grip on all sorts of surfaces and terrains.

What’s even better?

Get yourself a pair of proper X-C running shoes. These are designed to be more robust and versatile than track spikes and usually have better grip and traction.

I’d recommend visiting the nearest running store to get the needed shoes. You can also check out online shopping websites that also offer great cross-country running shoes.

Additional resource – How to choose running gloves

Cross Country Running Tips For For Beginners – Conclusion

Giving cross country running isn’t that hard. All you need is the right mindset, a reliable training plan, and the right gear. The rest is just details.

Please feel free to leave your comments and questions in the section below.

In the meantime, thank you for dropping by.

Keep training strong.

David D.